6ES7134-4GB01-0AB0

Ship to Stock in: Warehouse

6ES7134-4GB01-0AB0

★ ★ ★ ★ ★ 4.9 1948 Reviews

You May Also Like

Selling List

Description Reviews

6ES7134-4GB01-0AB0 ET200S, EL-MOD., 2AI STD I-2DMU, 0-20MA,

Artikelnummer

6ES7134-4GB01-0AB0

		SIMATIC DP, ELECTRONIC MODULE FOR ET 200S, 2 AI STAND. I-2DMU 15 MM WIDE, 4 .. 20MA; 13 BIT FOR 2-WIRE TRANSDUCER CYCLE TIME 65 MS/CHANNEL WITH LED SF (GROUP FAULT)
Supply voltage
Load voltage L+
● Rated value (DC)		24 V; From power module
● Reverse polarity protection		Yes; Destruction limit 35 mA per channel
Input current
from load voltage L+ (without load), max.		80 mA
from backplane bus 3.3 V DC, max.		10 mA
Power losses
Power loss, typ.		0.6 W
Address area
Address space per module
● Address space per module, max.		4 byte
Analog inputs
Number of analog inputs		2
permissible input current for current input (destruction limit), max.		40 mA
Cycle time (all channels) max.		Number of active channels per module x basic conversion time
Input ranges
● Voltage		No
● Current		Yes
● Thermocouple		No
● Resistance thermometer		No
● Resistance		No
Input ranges (rated values), currents
● 4 to 20 mA		Yes; on 50 ohms
Cable length
● Cable length, shielded, max.		200 m
Analog value creation
Measurement principle		integrating
Integration and conversion time/resolution per channel
● Resolution with overrange (bit including sign), max.		13 bit; 4 to 20 mA: 13 bits
● Integration time, ms		16,7 / 20 ms
● Interference voltage suppression for interference frequency f1 in Hz		60 / 50 Hz
● Conversion time (per channel)		65 ms; 55 / 65 ms
Smoothing of measured values
● Parameterizable		Yes; In four stages by means of digital filtering
● Step: None		Yes; 1 x cycle time
● Step: low		Yes; 4 x cycle time
● Step: Medium		Yes; 32 x cycle time
● Step: High		Yes; 64 x cycle time
Encoder
Connection of signal encoders
● for current measurement as 2-wire transducer
— Burden of 2-wire transmitter, max.		750 Ω
Errors/accuracies
Linearity error (relative to input range), (+/-)		0.01 %
Temperature error (relative to input range), (+/-)		0.005 %/K
Crosstalk between the inputs, min.		-50 dB
Repeat accuracy in steady state at 25 °C (relative to input area), (+/-)		0.05 %
Operational limit in overall temperature range
● Current, relative to input area, (+/-)		0.6 %
Basic error limit (operational limit at 25 °C)
● Current, relative to input area, (+/-)		0.4 %
Interference voltage suppression for f = n x (f1 +/- 1 %), f1 = interference frequency
● Series mode interference (peak value of interference < rated value of input range), min.		70 dB
Isochronous mode
Isochronous operation (application synchronized up to terminal)		No
Interrupts/diagnostics/status information
Diagnostic messages
● Wire break		Yes
● Group error		Yes
● Overflow/underflow		Yes
Diagnostics indication LED
● Group error SF (red)		Yes
Parameter
Remark		4 byte
Measurement type/range		deactivated / 4 to 20 mA
Group diagnostics		Disable / enable
Overflow/underflow		Disable / enable
Galvanic isolation
Galvanic isolation analog inputs
● between the channels		No
● between the channels and the backplane bus		Yes
● between the channels and the load voltage L+		No
Isolation
Isolation checked with		500 V DC
Dimensions
Width		15 mm
Height		81 mm
Depth		52 mm
Weights
Weight, approx.		40 g
last modified:		13.10.2014