Digital IO devices

Ship to Stock in: Warehouse

You May Also Like

Selling List

6ES7147-6BG00-0AB0 ET200ECO PN, 8 DIO, DC24V/1,3A, 8XM12

Artikelnummer

6ES7147-6BG00-0AB0

		SIMATIC DP, ET 200ECO PN, 8 DIO 24V DC/1,3A; 8 X M12, DEGREE OF PROTECTION IP67
General information
Vendor identification (VendorID)		002AH
Device identifier (DeviceID)		0306H
Supply voltage
24 V DC		Yes
permissible range, lower limit (DC)		20.4 V
permissible range, upper limit (DC)		28.8 V
Reverse polarity protection		Yes
Load voltage 2L+
● Rated value (DC)		24 V
● permissible range, lower limit (DC)		20.4 V
● permissible range, upper limit (DC)		28.8 V
● Reverse polarity protection		Yes
Input current
from load voltage 1L+ (unswitched voltage)		4 A
from load voltage 2L+, max.		4 A
Encoder supply
Number of outputs		8
Output current
● Rated value		100 mA; per output
24 V encoder supply
● short-circuit protection		Yes
Power losses
Power loss, typ.		6.5 W
Digital inputs
Number of digital inputs		8
● In groups of		4
Input characteristic curve in accordance with IEC 61131, type 3		Yes
Number of simultaneously controllable inputs
all mounting positions
— up to 60 °C, max.		8
Input voltage
● Type of input voltage		DC
● Rated value, DC		24 V
● for signal "0"		-3 to +5V
● for signal "1"		+11 to +30 V
Input current
● for signal "0", max. (permissible quiescent current)		1.5 mA
● for signal "1", typ.		7 mA
Input delay (for rated value of input voltage)
for standard inputs
— at "0" to "1", max.		typically 3 ms
— at "1" to "0", max.		typically 3 ms
Cable length
● Cable length unshielded, max.		30 m
Digital outputs
Number of digital outputs		8
● In groups of		4
short-circuit protection		Yes; Electronic
● Response threshold, typ.		1,8 A
Limitation of inductive shutdown voltage to		Typ. (L1+, L2+) -47 V
Controlling a digital input		Yes
Switching capacity of the outputs
● on lamp load, max.		5 W
Output current
● for signal "1" rated value		1.3 A; Maximum
● for signal "0" residual current, max.		1.5 mA
Parallel switching of 2 outputs
● for increased power		No
● for redundant control of a load		Yes
Switching frequency
● with resistive load, max.		100 Hz
● with inductive load, max.		0.5 Hz
● on lamp load, max.		1 Hz
Aggregate current of outputs (per group)
all mounting positions
— up to 60 °C, max.		3.9 A
Cable length
● Cable length unshielded, max.		30 m
Interfaces
Transmission procedure		100BASE-TX
Transmission rate, max.		100 Mbit/s
PROFINET IO
● Number of PROFINET interfaces		1
● Autocrossing		Yes
● Automatic detection of transmission speed		Yes
● Integrated switch		Yes
PROFINET IO Device
— IRT with the option "high flexibility" supported		Yes
— Prioritized startup		Yes
Protocols
PROFINET IO		Yes
PROFINET CBA		No
Supports protocol for PROFIsafe		No
PROFIBUS		No
Protocols (Ethernet)
● TCP/IP		No
● SNMP		Yes
● DCP		Yes
● LLDP		Yes
● ping		Yes
● ARP		Yes
Interrupts/diagnostics/status information
Status indicator		Yes; Green LED
Alarms
● Diagnostic alarm		Yes
Diagnostic messages
● Diagnostic functions		Yes
● Diagnostic information readable		Yes
● Monitoring the supply voltage		Yes; Green "ON" LED
● Wire break in actuator cable		Yes
● Wire break in signal transmitter cable		Yes
● Short circuit		Yes
● Short circuit encoder supply		Yes
● Group error		Yes; Red/yellow "SF/MT" LED
Galvanic isolation
between the load voltages		Yes
between load voltage and all other switching components		No
between Ethernet and electronics		Yes
Galvanic isolation digital inputs
● between the channels		No
Galvanic isolation digital outputs
● between the channels		No
Permissible potential difference
between different circuits		75 VDC / 60 VAC
Isolation
tested with
● 24 V DC circuits		500 V
● Interface		1 500 V; According to IEEE 802.3
Degree and class of protection
Degree of protection to EN 60529
● IP65		Yes
● IP66		Yes
● IP67		Yes
Connection method
M12		Yes
Dimensions
Width		60 mm
Height		175 mm
Depth		49 mm
Weights
Weight (without packaging)		910 g
last modified:		17.09.2014